O aumento do poder computacional trouxe novas oportunidades, tanto pessoais quanto de negócios. Mas faltava uma coisa importante. A capacidade de conectar um microfone diretamente a um laptop ou computador sem usar uma interface. No entanto, a criação do microfone USB resolveu esse problema.
São dispositivos plug-and-play e, portanto, muito fáceis de usar. Da mesma forma, eles são convenientes e abrem um mundo totalmente novo para entrevistas, podcasts, etc.
Avanços tecnológicos
Não há dúvida de que eles são um passo emocionante para certos ambientes. Mas eles certamente não são para todos ou todos os usos. No entanto, eles têm muito a oferecer em algumas situações, especialmente para aqueles que desejam uma opção plug-and-play.
Mas, é justo dizer que eles não causaram muita impressão no mercado de ponta. É improvável que você os encontre em estúdios de gravação. A qualidade tem algo a ver com isso, é claro. O tempo dirá se as empresas já produziram microfones USB para rivalizar com os microfones Neumann, Sennheiser ou AKG para vocais.
O Yeti Azul
Um dos melhores microfones USB disponíveis é o Blue Yeti. Feitos pela Blue, eles são uma das várias opções de USB que a empresa produz. É também um dos mais populares. Para gravar locuções, podcasts e entrevistas, ele faz um trabalho muito bom.
Não há reclamações sobre sua construção. É um microfone bem feito e bastante robusto e estável. É elegante, e parece bom. No entanto, se tem uma fraqueza, é o suporte.
O stand em si também é bastante estável e, em alguns casos, uma mais-valia. Mas pode ter um efeito negativo na gravação. Com isso em mente, montei esta análise dos melhores microfones Blue Yeti atualmente no mercado.
Um suporte alternativo? Muitas pessoas parecem concordar que é melhor usar um suporte de microfone alternativo ao invés do que é fornecido. Gostaria de fazer esta observação, no entanto.
A rosca no Yeti Azul para montagem é ⅝; portanto, você precisará encontrar um suporte com esse fio. Alternativamente, um suporte que tenha um adaptador para ele. Com base nisso, vamos dar uma olhada nos
melhores suportes para seu microfone Blue Yeti .
Os 8 melhores suportes de microfone azul Yeti para todos os orçamentos em avaliações de 2022
- Braço de lança para microfone de estúdio com montagem giratória RODE PSA 1 – Suporte para microfone Yeti azul mais durável
- Suporte de braço para microfone InnoGear – Areia para microfone Yeti azul mais ajustável
- Suporte de braço de lança para microfone DISINO Suporte de microfone de mola para serviço pesado - O melhor suporte para microfone Yeti azul para serviço pesado
- Suporte de microfone com braço de estúdio Iksee – O melhor suporte de microfone básico azul Yeti
- Lança de Suspensão de Microfone Ajustável Brilhante Leste – O Melhor Suporte de Microfone Azul Yeti Econômico
- Suporte de microfone de base curta com peso curto da Gator Frameworks – Melhor custo-benefício Suporte de microfone azul Yeti
- Barra de transmissão suspensa Heil Sound PL-2T – O melhor suporte de microfone Yeti azul balanceado
- Braço de transmissão de transmissão estilo tubo Blue Compass Premium – O melhor suporte de microfone de braço de lança azul Yeti
1 RODE PSA 1 Braço de lança de microfone de estúdio com montagem giratória – Suporte de microfone azul Yeti mais durável
Este é um suporte de microfone da empresa australiana Rode. Eles são conhecidos por fazer microfones e acessórios de qualidade. Mas tão importante quanto, eles fazem produtos que são robustos e resistentes. Um fator importante para um pedestal de microfone. O PSA1 é um dos
mais populares suportes de microfone para Blue Yeti usuários.
A construção É resistente e bem construído com um design todo em metal. O Blue Yeti pesa pouco mais de um quilo, e este suporte pode suportar até dois quilos e meio. Isso é mais do que suficiente para o microfone, o filtro pop e uma montagem antichoque.
Ele foi projetado para suportar o peso do microfone mais pesado. É fornecido com um adaptador para converter o tamanho da rosca de ⅜ para ⅝ para que o encaixe seja compatível. Isso o torna um dos
suportes de microfone Blue Yeti mais compatíveis por aí.
Opções para montagem Existem duas opções de montagem, o grampo de mesa e a instalação de inserção de mesa. O suporte de mesa permitirá que você o conecte a desktops com até 55 mm de espessura. No entanto, a inserção de mesa oferece um pouco mais de 70 mm de espessura. A montagem tem um design de eixo duplo. Isso tem um giro e facilita a fixação e o posicionamento do suporte em um local conveniente.
Um bom alcance Ele irá permitir-lhe muita distância em seu alcance. Até 33 polegadas de altura e 32 polegadas na horizontal. E permanecerá estável com um microfone conectado nesses extremos. É flexível e gira em 360 graus. Envoltórios de cabo de velcro estão incluídos para que você possa manter o cabo do microfone seguro e fora do caminho.
Mudanças de posição Para alterar a posição do braço da lança, ele é projetado com um mecanismo de mola para serviço pesado. Isso o torna seguro se você alterar a posição do braço e ele ficará onde você deseja. Não será afetado pelo peso do microfone.
Um bom suporte de microfone de suporte feito de bons materiais e deve ser considerado um dos melhores suportes de microfone Blue Yeti.
Prós
- Bem feito com bons materiais.
- Bom alcance e capacidade de retenção de peso.
Contras
- Os cabos não têm um canal para prender usando laços de velcro.
2 Suporte de braço de microfone InnoGear - Areia de microfone azul Yeti mais ajustável
A InnoGear é uma empresa que comercializa uma grande variedade de produtos. Portanto, você não pode se referir a eles como “especialistas em suporte de microfone”. Não tenho certeza de onde vem este suporte de microfone ou quem o projetou e construiu, de seu site que parece ser um segredo bem guardado. Dito isto, é um produto decente e vale a pena incluir.
Especialmente projetado para microfones azuis Este é um suporte de microfone que funcionará com muitos da linha Blue USB. Incluindo o Snowball, o Yeti e o Yeti Nano. Tem uma construção muito estável, sendo uma construção toda em metal com braços tubulares de aço com meia polegada de espessura. That gives it a high load-bearing capacity of up to four and a half pounds.
There is a spring-balanced system built-in to give you plenty of secure movement for getting the right position. The cabling is hidden inside the arm and not exposed to view. It is supplied with an ⅝-inch thread connector for fitting the mic.
The Boom Arm Good adjustments and reach. Horizontally it will give you up to thirty-eight inches. And vertically up to thirty-three and a half inches. The arms will support the weight of a Blue Yeti mic when at full reach. The boom arm is foldable for storage when not in use. There is a swivel action for adjusting the mic position. But there is no locking facility to keep it in a set position.
The Clamps There are two mounting options. There is a typical desk clamp as well as a desk-insert attachment. Unclipping the mic from your desk is easy. It will attach to all desks that have a lip of over two inches. All this adds up to it being one of the
best desk mounted BlueYeti microphone stands Você pode comprar.
Prós
- Good quality all-metal build.
- Plenty of adjustment options at a cost-effective price.
Contras
- The swivel on the boom arm doesn’t lock.
3 DISINO Microphone Boom Arm Stand Heavy Duty Spring Mic Stand – Best Heavy Duty Blue Yeti Microphone Stand
This is a mic stand with a very heavy-duty look about it. I wouldn’t say it was the most visually appealing in some parts of its design, but it certainly does the job.
A construção It is built with a steel tube frame with springs enclosed internally, which gives it a nice stylish look. It is strong and is not going to bend easily. Although you should ensure that all tightening controls are loosened before adjusting them.
Whilst the design of the boom arms is attractive; the clamp is a different thing altogether. It has a “vintage” woodworking G-clamp look, with what seems like an antiquated locking control.
The look seems to contradict the rather stylish steel tubes above it. Nevertheless, it does its job and offers a secure fit. The scissor arm design is fully adjustable and is sprayed using an electrostatic powder. This helps to make it anti-rust.
The Load It can hold an impressive five pounds in weight. As a result, it’s one of the
strongest Blue Yeti microphone stands Você pode comprar. It is fitted with a standard ⅝” thread, so there is no need for an adapter. Two scissor tube arms will extend to about twenty-eight inches. These can be folded away after use.
The Mount It has clamps that will fit desks up to three inches in depth. The clamp itself has rubber fittings to ensure it doesn’t scratch the desk. The fitting allows the boom arm to be swiveled if necessary. The movement when clamped to the desk is smooth and stable.
A Budget option Although the price point intimates that this is a budget range product, it is well-made and very secure. It may not have the length and reach of some stands, but it is one of the
most secure Blue Yeti microphone stands acessível.
Prós
- Well-made with good materials at an attractive price point.
- Safe and secure fit holding up to five pounds in weight.
Contras
- Some may need a longer reach.
4 Iksee Studio Arm Microphone Stand – Best Basic Blue Yeti Microphone Stand
This is a basic mic stand with a boom arm that will work with various microphone models. It is a little limited in that it will only operate with microphones that weigh up to 2.86 pounds. That will rule out some but includes the Blue Yeti. On the other hand, it does make this one of the
best lightweight Blue Yeti microphone stands acessível.
A construção This stand has quite a sturdy all-metal build with its steel frame and iron base. It has a simple design with an internal spring. This allows some adjustments to the position of the mic, either up or down. It also has a 360-degree rotation. The arm is adjustable, so it can be folded away after use. It has a decent amount of reach while retaining its balance.
The Clamp It can accommodate desktops that are up to 2.2 inches in depth. It is easy to adjust, but in my view, it doesn’t have the most secure fitting. The base plate of the clamp is quite small, and the knob for tightening the clamp is very basic.
It certainly appears that you might struggle to get a decent amount of pressure to hold a mic in some positions. It does take a reasonable weight of mic for this stand to function correctly. If the mic is very light, it does not apply enough weight for operation.
Some extras You are supplied with a threaded screw for connecting the Blue Yeti and two foam covers for the mics.
Prós
- Basic boom arm stand with an all-metal build.
- Adjustable arm with 360-degree rotation.
Contras
- The clamp is a little vulnerable.
5 East Shining Adjustable Microphone Suspension Boom – Best Budget Blue Yeti Microphone Stand
If you are looking for a budget boom stand for your Blue Yeti, then this from East Shining might be an option.
A construção This might not be the most aesthetically pleasing stand you will find, but it certainly does the job. It has dual suspension springs placed on each of the boom arms. These act to protect the mic from any unwanted movements or shaking but also increases the mic’s stability. It can support loads of up to four and a half pounds, so it will cope easily with the Blue Yeti.
It is made from Zinc Alloy and has a steel frame. Therefore, the build is strong and sturdy. It has been given an electrostatic powder-sprayed finish. This makes it anti-rust and will ensure it stays in decent condition. The boom arms are lightweight and fully adjustable and can be folded away easily after use.
The Clamp It has a simple table mounting clamp with a screw tightener. It is easily fitted to a tabletop that has a depth of up to 2.15 inches. The clamp has a lining of a soft sponge material where it makes contact with the table. This is just to protect it from possible scratching. For added protection, there is also a rubber washer.
The Reach With the two legs combined, it can reach up to twenty-seven and a half inches. It will therefore be able to fit easily into most environments and allow you to get mic angles correct. It comes with an instruction booklet, a plastic clip mic holder, and a ⅝” brass adapter to fit the thread of the Yeti.
A word of caution You do need to be careful when opening the package this stand will be delivered in. The arms are held together with a simple band. When it is broken, the arms will spring out very forcibly. Best not to have your fingers inside the package when they do.
Prós
- Quite well-built beats basic stand with a decent reach.
- Cost-effective option.
Contras
- Some will need a stand with a bit more visual style.
6 Gator Frameworks Short Weighted Base Microphone Stand – Best Value for the Money Blue Yeti Microphone Stand
Now we move away from the boom arm design to a short stand with a compact base. This has a maximum height of just 23 inches, with a boom arm measuring 16 inches.
A construção The base is quite compact at 4.5″ by 8″ and is made of heavy-duty steel. This will provide it with stability and good balance, so it will not get knocked over easily. Because of its low stature, it offers up the potential for other uses than as a desk mic stand. We will look at that later.
To prevent any rumbling noise that may occur between the base and the desk, it has a non-slip vibration gasket. Another plus point is the integrated cable management. Thus keeping unwanted cables out of the way.
Compact arm extension For adjusting the position of the short arm, there are some soft rubber knobs. This makes them easier to grip and turn. That feature is not often included but is a nice touch. It takes just a quarter turn to be able to make those adjustments.
At its full extension, the stand is balanced and stable. And even though the Yeti weighs just over one pound, the stand will not topple over. Some people prefer single-section boom arms as they are easier to adjust. That certainly is the case with this stand.
What other uses? I mentioned earlier that it might have other uses. It occurs to me that this is a good stand for placing on a desk and using your mic with your computer. But it also has other possibilities.
How about a mic in a home or small recording studio for placing in front of a kick drum? Or for micing up an amp? It is stable and holds a decent weight, and is a good height. As a result, this is one of the
most versatile Blue Yeti microphone stands no mercado.
Set at a very attractive price point, this has to be considered as one of the best Best Blue Yeti Microphone Stands.
Prós
- Well-built stable mic stand at a great price point.
- Offers a variety of uses.
Contras
- Some will prefer a full-size boom.
7 Heil Sound PL-2T Overhead Broadcast Boom – Best Balanced Blue Yeti Microphone Stand
Back to the boom design for this stand from Heil Sound. They are a company based in Illinois and were established in 1966 by Bob Heil. They also manufacture microphones and other accessories, so they ought to know what makes a good stand.
Well laid-out design They have gone for a simple, uncluttered, but functional design. One of the features is that any cabling for the mic is hidden away. This puts it out of sight, of course, but also prevents any unfortunate accidents. They also make sure the springs are all hidden away internally. That is a feature that many prefer.
A construção A strong all-metal build ensures it is stable, and the springs we have mentioned offer a perfect balance. The design features removable plates on the top and the back. This allows you to thread through the mic cable.
It can handle a weight load of up to three and a half pounds. Holding the Blue Yeti stable and in a fixed position is not then a problem. It will take a ⅝” thread.
The Clamp There is a standard C-clamp mounting system, which may be considered its weak point. The clamp is not part of the stand itself and is included as an extra. And while the stand will hold the mic securely, it is only as secure as the connection to the table or surface.
The clamp will attach the stand to a table, but it does not feel as secure as some. Furthermore, the clamp has no padding, so it could scratch any surface to which it is attached. You can insert your own padding, but then the clamp tends to move around on the surface.
Not the cheapest around, and we remain unconvinced about the fitting. The boom arm is nicely designed and works well. The same cannot be said for the clamp.
Prós
- Nicely designed with good materials.
- Cabling and spring systems are hidden away out of sight.
Contras
- The clamping system is inefficient and can mark your desk.
8 Blue Compass Premium Tube-Style Broadcast Boom Arm – Best Blue Yeti Boom Arm Microphone Stand
Who should know what is required to make a great stand for the Yeti? You would think it would be the company that made it. This is Blue’s first attempt at a mic stand.
A construção It features a strong and stable tube-style design made from aluminum. This allows the springs and the cabling to be kept safely out of the way and out of sight. Cable management is important with mics that are used in enclosed spaces. It is easy to trip over a cable and send the mic crashing to the floor.
Needless to say, it is designed to hold the weight of the Yeti. It will hold any mic up to 2.4 pounds in weight.
Further design features It allows you to complete a 360-degree rotation and a fully adjustable boom. You can therefore get the positioning exactly how you want it.
The friction hinges tighten by hand and give you a quiet and smooth operation. It is compatible with all the standard shock mount fittings.
Clamping They have used a C-clamp system. Once again, if there is a weak point, it is the clamping system. It is a little bit insecure and could damage the surface you attach it to.
This stand comes with a twenty-foot XLR cable and a pop filter. Both are more than useful additions. Furthermore, it is one of the
most affordable Blue Yeti microphone stands no mercado.
Prós
- Good build quality with plenty of adjustments and 360-degree rotation.
- Cabling and Springs are hidden in the arms.
Contras
- Clamping is not as secure as it might be.
Best Blue Yeti Microphone Stands Buying Guide
Although often overlooked, the stand is an important piece of equipment for a microphone. An inefficient stand can have several effects that are not what you need when trying to get a decent recording.
Everyone’s requirements will differ slightly. So, the first thing you need to do is decide what sort of stand you need. There are a couple of options.
Stability
The stand must be stable to be able to hold the mic. That means not only supporting its weight but also having good adjustments. You will need to be able to get the mic in exactly the right place.
What sort of stand?
Do you want a boom arm stand that will give you plenty of room? Or do you prefer a desk-mounted stand? The boom will give you the reach and the room, but it can have its stability problems. A desktop mic might incur the same problems that the Yeti has with its built-in stand.
Before you buy
After deciding, but before you buy, you need to make sure there’s enough of an overhang from the edge of the desk. If there is none, most boom arm mics cannot be attached.
Budget
None of the stands we have looked at are particularly expensive. You will be able to get a good stand for a reasonable investment.
Looking for a Great Microphone or Mic Accessories?
Podemos ajudá-lo com isso. Check out our in-depth reviews of the Best Microphone Stands, the Best Live Vocal Mics, the Best Interview Microphones, the Best Computer Microphones, the Best Cheap Microphone Under $50, the Best Microphones For YouTube, the Best USB Microphones you can buy in 2022.
And if you are after more awesome Blue microphone products, have a look at our comprehensive Blue Snowball USB Microphone Review, our Blue Yeti X Review, our Blue Snowball iCE Review, our Blue Yeti USB Mic Review, and our Blue Baby Bottle Review for more amazing items currently on the market.
What are the Best Blue Yeti Microphone Stands?
Not being a great fan of boom arm stands, I would go for a stable short weighted base stand. I would choose the…
Gator Frameworks Short Weighted Base Microphone Stand Well-made, safe and secure, it is solid enough to do what I need. But it also has plenty of potential for use in other recording applications. My choice for the Best Blue Yeti Microphone Stand.
Até a próxima, deixe-se ouvir.
