Já aconteceu com você que você está conversando com alguém sobre tecnologia de TV e eles mencionam alguma palavra que você não conhece e ficam confusos? Você já se deparou com algum termo que não faz muito sentido ao ler um guia para comprar a melhor TV? Existem várias palavras ou terminologias que encontramos ao ler ou discutir TV. Torna-se especialmente irritante quando você precisa comprar uma TV e se depara com muitas terminologias desconhecidas. Para ajudá-lo com esse problema e familiarizá-lo com esses termos desconhecidos, preparamos uma lista de terminologias de TV.
Aqui vamos discutir e tentar explicar essas terminologias difíceis em palavras simples.
- Proporção:
A proporção de aspecto refere-se à proporção de largura e altura de uma tela de TV e define a forma da TV. Existem várias proporções para TVs e varia de acordo com a resolução. Certas proporções de aspecto são adequadas apenas para determinadas resoluções, projetadas para oferecer a melhor qualidade de imagem sem distorção ou alongamento e para evitar espaços em branco em qualquer lado da imagem. A proporção de aspecto mais comum para TVs hoje é 16:9. Quando o conteúdo e a proporção da sua TV não correspondem, barras pretas aparecem no espaço em branco (as barras verticais são chamadas de pilares e as barras horizontais são chamadas de caixas de correio). Em algumas TVs, você pode resolver esse problema ampliando a imagem, cortando a imagem ou usando uma mistura de ambos. 
Crédito da imagem:Wikimedia Commons
- Bezel:
Em termos simples, a moldura significa a moldura ao redor da tela ou a forma estrutural que você pode ver na frente da TV, exceto sua tela. Embora sejam importantes para a integridade estrutural, eles afetam a experiência de visualização, pois cobrem uma parte da tela em todos os lados. Atualmente, a maioria das TVs não tem moldura, o que significa uma moldura muito fina na tela, permitindo que a tela da TV seja maior sem ter que aumentar o tamanho da TV. 
Crédito da imagem:trustedreviews.com
- Taxa de contraste:
A taxa de contraste em uma TV significa a relação entre as configurações mais claras e mais escuras. A taxa de contraste de uma TV é um dos recursos importantes que ajudam a decidir o quão boa é uma TV. Afeta as imagens que você vê na tela e a taxa de contraste é afetada por vários fatores, como refletância da tela, iluminação da sala, configurações de imagem e o próprio conteúdo exibido. A taxa de contraste de uma TV pode ser medida em duas bases, ou seja, taxa de contraste nativa e dinâmica. A taxa de contraste nativa, também conhecida como taxa de contraste estático ou na tela, representa o papel do painel da TV, enquanto a taxa de contraste dinâmico envolve a flutuação das luzes de fundo LED instaladas na parte traseira da tela para melhor contraste. Os fabricantes de TV usam métodos diferentes para medir a taxa de contraste, tornando esse recurso irrelevante ao comprar uma nova TV. Mas, a taxa de contraste é muito útil ao comparar diferentes TVs antes de decidir qual comprar.
- CRT:
CRT ou Cathode Ray Tube (também conhecido como tubo de imagem) na TV CRT é um tubo de vácuo onde são criadas as imagens que vemos na TV. A tela revestida de fósforo ou fluorescente é escaneada por feixes de elétrons para formar as imagens. Os feixes se movem para frente e para trás, iluminando as linhas de pontos de fósforo dentro do tubo de vidro, desenhando várias linhas na tela e criando figuras ou imagens para a TV. Agora desatualizadas, as Direct TVs tinham um grande tubo de imagem dentro delas, enquanto as TVs CRT de projeção traseira e frontal têm três tubos de imagem para cores primárias, ou seja, verde, vermelho e azul.
- Porta Ethernet :
A porta Ethernet da sua TV permite conectar sua TV à Internet com a ajuda de um cabo. Tudo o que você precisa fazer é conectar uma extremidade do cabo ethernet à porta e a outra extremidade ao roteador para transmitir programas e filmes da Internet na sua TV. Ele fornece uma conexão mais estável com menor latência e melhor velocidade. 
Crédito da imagem:Wikimedia Commons
- Taxa de quadros:
Taxa de quadros significa a velocidade na qual os slides de imagem consecutivos são exibidos. It is usually expressed as frames per second or fps. Higher the frame rate, the higher the number of frames used and it will mean more bandwidth for streaming the video. High frame rates have become popular these days as they capture a higher number of images per second which results in a smoother video. The high-definition videos often have a frame rate of 60 fps.
- HDMI:
HDMI or High-Definition Multimedia Interface is a digital interface that helps in transferring high-definition audio and video signals through a cable. It can be used to transfer a video quality of up to 4k Ultra HD resolution, 3D videos, and multichannel surround sound in high quality. 
Image credit:Pixabay
- HDR:
HDR or High Dynamic Range is a feature that affects the TV’s contrast ratio and color accuracy and helps make the pictures look more realistic. It is almost a must-have feature for TVs these days due to the detail it provides to the images through the right color balancing. Almost all the mid-range to high-range TVs have this feature and even most of the movies and shows on TVs are HDR now. Though, one thing to remember here is that TV HDR and photo HDR are not the same. These are two different concepts with the same name, making almost everyone confused.
- kHz:
KiloHertz or kHz represents a thousand frequency cycles per second. In simple words, it is a measurement of frequency i.e., the number of times a wave repeats itself in a second. 1 kHz means 1000 times per second. It is also used to measure the signal bandwidth, digital as well as analog. In the case of TVs, higher kHz means better sound quality.
- OLED:
OLED (Organic Light Emitting Diode) is a display technology that uses thin organic films between the two electrodes to produce light with the help of electricity. The organic process of creating the images on the screen with the light produced is called electroluminescence, meaning that the display is self-illuminating and does not need any backlight. OLED TV panels are lighter and thinner in comparison to LCD TVs and also help in saving energy.
- Over the top services:
Over-the-top services or OTT services are streaming services that offer media content directly to the viewers through the internet. These services are provided by bypassing the traditional platforms like broadcast, cable, and satellite TV. OTT content mostly includes shows and movies that you watch on phone, tablet, or laptop and can be streamed on an internet-connected TV like Smart TV. Some of the OTT service providers are Netflix, Amazon Prime, Disney+, etc.
- Pixelation:
Pixelation means stretching of the pixels beyond their original size and it is usually caused due to a weak signal. When the signal is poor, sometimes the TV fails to get the complete data or any data at all during the transmission. This leads to the formation of an incomplete image where some pixels are either missing or too stretched. 
Image credit:Flickr
- Plasma:
Plasma is a screen technology that was used in making the first flat display panels for large TVs and was a dominant TV technology just a few years back. A plasma display panel has small cells (like tiny CFLs) which are coated with red, green, or blue phosphorus. The cells also have neon or xenon gas inside them which creates invisible ultraviolet lights. These lights are then converted into the red, green, or blue light that we see on the screen via the light emitted by these cells. When we compare plasma with LEDs, plasma TVs are better as they have better picture quality and viewing angles. But, it also has many disadvantages, one of them being that it is now outdated technology. Also, the little cells or gas packets behind the panels can cause burn-in on your screen i.e. burn the images in your screen to show them even when your TV is switched off. They are also available only in larger sizes and are not that energy-efficient.
- Quantum Dots:
Quantum dots can be defined as nanocrystals that absorb light and convert its wavelength. These are used in QLED TVs where they are placed in front of a normal LED backlight in a layer. All these crystals emit individual colors of their own based on their size. Though the light emitted by these quantum dots still goes through the filter, the lights are highly pure that helps in expanding the TV’s color range, and creates more intense and deeper colors. These dots also enhance the light efficiency of the TV and thus produce brighter pictures.
- Resolution:
Resolution can be defined as the number of pixels or dots that create the pictures that you see on your TV screen. It is denoted as the number of pixels in one horizontal line by the number of pixels present in one vertical line. Higher the number of pixels, the higher the resolution, and the better the picture quality. There are four resolutions commonly used in TVs these days and each of them has a name as which are 1280×780 (HD), 1920×1080 (Full HD), 3840×2160 (Ultra HD/4k), and 7620×4380 (Ultra HD/8k). TV resolution is usually indicated in two ways, for example, 1080i or 1080p resolution. When you have both the options in front of you, choose the latter one. The “i” means interlaced and the “p” means progressive. The difference between both is that the interlaced videos display every alternate horizontal pixel line while the progressive lines display every horizontal pixel line, making the picture quality of progressive videos better than its counterpart. 
Image credit:Wikimedia Commons
- Refresh Rate:
Refresh rate is defined as the number of times your TV screen refreshes itself in a second. It is denoted by Hertz or Hz. A higher refresh rate usually means smoother motion on the screen, but not always. However, the refresh rate should not be confused with the frame rate (fps). Frame rate represents the number of frames displayed on the screen per second. For clear motion and images, make sure that the refresh rate and frame rate of your TV match or in other words are the same, for example, if the refresh rate is 60 Hz, the frame rate should be 60 fps.
- Soap Opera Effect:
Soap Opera Effect is a visual effect created by most of the TVs by default. It involves creating additional frames in between the already existing ones by motion interpolation process to make the pictures look more crisp and realistic. It shows the content on your screen at a refresh rate that is higher than the original source of the content. Though it comes in handy when there is an action scene on the screen like sports events, it also wipes the normal cinematic blur from any fast-moving object on the screen. Removal of the blur hinders the ideal cinematic experience and makes the pictures more animated, giving them a soap opera effect, that is why the name. You can turn it off on your TV from the settings. This visual effect is also known as Enhanced Motion, Smooth Motion, or Auto Motion Plus, which are just marketing strategies.
- Viewing Angle:
Viewing angle means the maximum angle at which you can watch your TV screen comfortably without any color shift or loss of brightness. The ideal position is directly in front of the TV screen and at eye level. As per LCD/ LED TV manufacturers, the best viewing angle for your TV is 88 or more. At this angle, you get clear and well-defined images with the best color accuracy.
- UHD:
UHD or Ultra High Definition represents a higher resolution for the TV display. UHD TVs come in 4k (3840×2160) and 8k (7620×4380). These resolutions have a higher number of pixels than a normal HD TV. UHD displays are used in larger TVs, so you can enjoy a clearer and crisp image even while sitting relatively closer to the TV.
- Upscaling:
Upscaling basically means stretching an image with a lower resolution to fit on a larger display. In this, the pixels of the image with low resolution are copied and are repeated to fill up the display of a higher resolution. Almost every TV comes with upscaling now. In the case of HD TVs, the upscaling process makes the lower resolution images look bigger and better on the screen by increasing the pixel count.
